Finding the Right Replacement Aluminium Seals for Doors and Windows 58

Jump to: navigation, search

Aluminium is commonly used for the production of doors and windows for several reasons. Considering it is a metal, aluminium is highly lightweight, even so, its most beneficial characteristics are its durability and its capability to resist corrosion. As doors and windows are regularly confronted with the elements, this is vital.

Though aluminium is an optimal material for exterior functions, to keep heat indoors and cold and moisture outside, sealing materials are key. Without having aluminium seals for doors and windows, households and work environments would be subjected to draughts, rattling windows and water leaks in wet conditions. Window seals are most traditionally fabricated from rubber and plastic materials, for example thermoplastic elastomer, thermoplastic polyurethane, PVC, and Nitrile rubber.

When producing door and window seals, it's important to determine sealing materials that are intended for outdoor environments and sealing applications. For exterior doors and windows, a resistance to UV, ozone and standard abrasion is essential, along with adequate elasticity and compression set capabilities to offer a tight seal and behave as an insulator from the elements. Incorrectly sealed doors and windows are less prone to prevent draughts and are likely to create a build-up of damp between double glazing panes or around a door.

How are aluminium seals developed?

Ordinarily, window and door seals need a consistent cross section to make certain all places are effectively sealed. The ideal way to do this is to employ an extrusion process, where the raw rubber or plastic material is pressed through a specially designed die with the relevant cross section. Seals are then able to be cut down to size to deliver the correct length to suit each window or door.

Replacing aluminium seals

Whilst aluminium door seals are designed and produced to become resilient solutions against draughts and damp, dependent on the material used, after a period of time seals and extrusions might fail. A lot of manufacturers of doors and windows use standard or very similar types of aluminium seal and consequently, failed seals can merely be replaced with minimal trouble. In some cases, a direct replacement is available in stock, or at a minimum, an appropriate replacement can be obtained by knowledgeable staff if you provide them with a sample.

Whilst the hardest task is often finding the right aluminium seals to suit a specific window or door, depending on the particular design of an extrusion, seals can vary in how hard they are to replace.


• Simple �bubble' seals are usually uncomplicated to replace. Because of the simple cross section of the extrusion, the outdated seal can be drawn right out and replaced with the new. • On the other hand, an �E' gasket, also frequently used as an aluminium seal, is one of the toughest extrusions to replace since they are clipped into a window frame.

If you're looking for replacement aluminium seals, you can send a sample to ExtrudaSeal and benefit from their free matching service.

You can get further information here about aluminium seals.

Personal tools